Everlast PowerMTS 211Si MIG DC TIG STICK 200 amp Multi-Process 110/220 Dual Volt

  

If you are looking for an all around performer in the your fab shop, or need a go to unit on the work site, the PowerMTS 211SI has more than enough capability to handle most daily chores. As one of the newest multi-process welders in the Everlast PowerMTS line, the unit has been completely redesigned with the user in mind. This new digital inverter model features all the capability of previous generations but also adds synergic capability to the MIG component of the MIG/TIG/Stick welder. The synergic offers quick setup and use of the welder based off of user input of wire diameter and metal type. Manual override is always a choice when operating the unit in the Synergic mode so that the operator can fine tune the settings to the perform to his or her expectations.

The unit features a standard MIG mode as well and setup is fully controlled by the operator. The welder is also equipped with a synergic spool gun mode for those that need it. The panel and programming has been designed so that the operator has command of all the features without having to access complicated menus or open the cover. Compare that to other models on the market, and you'll see how easy everything is to operate and connect by comparison. The foot pedal and TIG torch are included and connect directly to the front. There are no special adaptations or equipment needed to weld TIG. The TIG torch does not need a manual gas valve because gas flow is controlled automatically and is programmable on the panel for both pre-flow and post-flow operation. No, rather the PowerMTS 211Si was designed to give excellent performance and convenience using any process it offers.

The unit also features solid TIG capability with an industry first: High Frequency starting of the arc. In the compact Multi-process market, Everlast has designed and introduced a touchless TIG start for maximum weld quality. Of course, the unit is still equipped with lift start capability if you are working in a place that is electronically sensitive to High Frequency. Stick mode operation has been improved with the addition of Hot Start duration and Hot start intensity adjustments. All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.

Light weight design makes the unit extremely portable, ideal for jobsites and motorsports. 8 Diameter wire spool capacity provides a good compromise for long duration welding and portability. Synergic MIG operation or Standard MIG operation. Easy to use, operator friendly panel to select features.

Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics. Adjustable Arc Force Control allows the user to dial in desired Stick welding performance. Adjustable TIG Up/ Downslope allows the user to control the end of the welding cycle. Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.

Foot Pedal for TIG and TIG torch included. Spool gun Capable for MIG. Exclusive 9 channel memory function allows favorite settings to be stored for quick setup. High Frequency Start and Lift Start Modes for TIG. 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.

Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality by reducing porosity during start/stops. Trafimet Series 15 MIG torch with Euro style quick connect fitting. Stick electrode holder with 10 ft cable and 35 series DINSE-style connector. Work clamp with 10 ft. Cable and 35 series DINSE-style connector. 26 Series TIG torch with cable and 35 series DINSE-style connector.

Spare consumable starter kit (does not include tungsten). Series 17V gas valve TIG torch 15 or 25 Ft. MIG, DC TIG, DC Stick.

DUAL VOLTAGE 120/240 1 PHASE. Maximum Rated (I1EFF) Input Amps. DC Lift TIG Output Range. 240V: 10A-200A/10.4V-18V (HF Start and Lift Start). Variable MIG Inductance/Stick Arc Force Control.

Standard Drive Roll wire size. 8 (up to 12 lb). High Frequency Start and Lift start capability in TIG mode. Synergic MIG allows easy setup and adjustment.

Minimum Generator Wattage needed for maximum output on 240V: 8500 W. Appearance of accessories and consumables may vary from what is depicted. This unit is not recommended for welding with E 6010 electrodes. Weld up to a maximum of 3/8 single pass.

Weld up to a maximum of 5/8 multi-pass. Weld a minimum of 24 gauge. Single pass welds greater than 1/4 are not recommended as a sound welding technique.

Weld up to a maximum of 1/4 single pass. Weld up to a maximum of 5/8 mult-pass. Weld with a maximum of 1/8 diameter electrode.

Weld with a minimum of 1/16 diameter electrode. If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost. We will do our best to expedite backordered items as soon as possible.

3- Please provide a physical address. The item "Everlast PowerMTS 211Si MIG DC TIG STICK 200 amp Multi-Process 110/220 Dual Volt" is in sale since Tuesday, August 21, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Multiprocess Welders & Cutters". The seller is "fox_merchand" and is located in Daly City, California.

This item can be shipped to United States.

• Power Source: 110/220V Electric
• Model: POWERMTS 211SI
• Modified Item: No
• Custom Bundle: No
• Current: 1 Phase
• Multi-Process: Yes
• Processes: MIG, Flux Core, TIG, Arc, Stick
• MPN: POWERMTS 211SI
• Brand: Everlast
• Non-Domestic Product: No