Ooutput 5A CT Class 0.5s/Class 1.0 Accuracy. Modular (72mm)35mm Din rail mounting LCD display. This meter can be easily used to read KWH in marinas, sublets, subpanels, or from any appliance or electrical equipment and it can also be used for complex analysis or many other parameters for industrial purposes.Software available and modular for different size of installations. This unit measures and displays the characteristics of single phase two wires(1p2w 1 CT needed), two phase three wires (2p3w 2 CTs needed), three phase three wires(3p3w ONLY 2 CTs needed) and three phase four wires(3p4w 3 CTs needed) networks. The measuring parameters include voltage(V), frequency(Hz), current(A), power(kW/Kva/Kvar), import, export and total Energy(kWh/kvArh). The unit can also measure Maximum demand current and power, this is measured over preset periods of up to 60 minutes. This unit can be setup for 1A, 5A, or 333mV CT operations, it can be configured to work with a wide range of CTs. Built-in pulse outputs and ModBus. This unit is powered from its internal separate auxiliary (AC or DC) power supply. Two-way fixed connector with 2·5mm2 stranded wire capacity. 50/60Hz ±10% or 120V to 380V d. Powered from the monitored supply by linking the voltage reference and neutral reference in to terminals 5 and 6 (Please refer to wiring diagram). The Unit can measure and display. Voltage (L-N and L-L) of all phases. Currents of each phase and Neutral. Power, maximum power demand and power factor. Active energy imported and exported.
Reactive energy imported and exported. THDu % of each phase (total harmonic distortion).
THDi % of each phase (total harmonic distortion). We have modbus to usb and other modbus interfaces to facilitate communucations. Two pulse outputs measured: active and reactive energy. The Pulse for active energy is 3200imp/kWh. (Terminals 11 & 12) The pulse width for Pulse 1 can be set from the set-up menu (Terminals 9 & 10).The unit can monitor and display the following parameters of a single phase two wire(1p2w), two phase 3 wires (2p3w), three phase three wire(3p3w) or three phase four wire(3p4w) system: Voltage and Current Phase to neutral voltages 100 to 289V a. (not for 3p3w supplies) Voltages between phases 173 to 500V a.
(3p supplies only) Percentage total voltage harmonic distortion (THD%) for each phase to N (not for 3p3w supplies). Percentage voltage THD% between phases (three phase supplies only). Current THD% for each phase. Import/Export active energy 0 to 9999999.9 kWh. Import/Export reactive energy 0 to 9999999.9 kVArh.
Total active energy0 to 9999999.9 kWh. Total reactive energy 0 to 9999999.9 kVArh. Measured Inputs Voltage inputs through 4-way fixed connector with 2.5mm² stranded wire capacity. Single phase two wire(1p2w) Three phase three wire(3p3w) Three phase four wire(3p4w) unbalanced. Line frequency measured from L1 voltage or L3 voltage.Three current inputs (six physical terminals) with 2.5mm² stranded wire capacity for connection of external CTs. Nominal rated input current 5A or 1A a. The item "Smart energy meter KWH Volts Amps / Power full analyzer Modbus 2 CTs included" is in sale since Saturday, April 20, 2019.
This item is in the category "Consumer Electronics\Other Consumer Electronics". The seller is "beyondtech" and is located in Miami Beach, Florida. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Costa rica, Dominican republic, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.