AlorAir 360 Degree Intake Air Filtration System Woodworking, Purecare 1350

  
360 degree air Intake Air Filtration System? The Shop Dust Collector has a 360 degree air intake design, powerful enough to cover a large area with high circulating airflow, sawdust from woodworking, grinding, sawing, etc. Improving your workplace's air quality.

The Air Filtration System for Woodworking is equipped with a Strong Vortex fan, which generates a strong airflow when working, and can maintain a high static pressure state even if the filter covers a large amount of Wood chips. It has two-stage speed selection (1050/1350 CFM).

Suitable for wood carving workshop, Woodworking, Garage. The shop air filtration system is equipped with a filter with class MEVR 11, which can stop 90% of 3-10? M particles and 85% of 1? Ideal for wood carving, sanding, turning, scroll saw work, rotary tools, powder mixing, etc. It guarantees perfect results in terms of reducing indoor air pollution. The filter can be easily replaced. Timer cycle controller, You can set fan to shut down automatically in 1-9 hours. IR remote system, there is no wireless interference, and the anti-interference ability is strong. With a hook and chain, the shop dust collector is easy to move and can be hung from the ceiling in the shop or placed on a workbench. Each AlorAir air filtration system has been strictly tested to ensure the perfect use of the product. 2-Speed Air Filtration System with Remote Control. Purecare 1350 air filtration system is a highly efficient device, widely used in different workspaces, providing multiple benefits for your work environment. It removes films of dirt, debris, particles and fine sawdust particles from the air for improving wood turning, sanding, sawing, chipping and air quality. Features 360 degree air intake design that circulates air in a 400 square foot space up to 13 times per hour. Use Vortex fan to create more powerful wind, offer 2 optional airflow speeds of 1050CFM/1350CFM for your adjustment. Purecare 1350 dust collector includes an infrared remote control, in addition to manual control, also supports remote control within a certain distance. High-density MERV-11 is easy to disassemble and install, assisting unit to achieve more thorough cleaning. 1-9 hour programmable timer allows you to set the time you desire, the unit automatically shuts off when the set value is reached. Purecare 1350 air filtration system has a 360 degree air intake design. Compared with traditional units, it can improve the air quality of woodworking workshops more efficiently and quickly, providing you with better air circulation. Hang it from the ceiling of the workshop or place it on a horizontal surface to effectively remove sawdust particles or other allergens from the space up to 1350 cubic feet per minute. The Vortex fan is capable of delivering greater airflow with a smaller footprint, up to a speed of 180 watts, and can maintain a high static pressure state even if the filter covers a large amount of Wood chips.

Two optional speeds (1050CFM/1350CFM) allow you the freedom to choose the efficiency of your air filtration system based on your actual needs. 360 degree air intake is designed to cover your work area in all directions, up to 1,700 square feet. Lasts Long & Filters Strong. This dust collector features a MERV-11 filter made of non-woven glass microfiber with a pleated design that can be easily replaced and reused. It eliminates 90% of 3 10?

M particles and 85% of 1? Use a separate electrical circuit for your tools.

This circuit must not be less than a 12AWG wire and should be protected with a 15 A time-delayed fuse. Clean the particles of the filter regularly to avoid efficiency reduction.