Electric Vehicle Level 2 EV Charger 32 Amp 6-50 Plug ADJUSTABLE 25ft 240 Volt

  
Zencar Level 2 EV Charger 240V 25ft Turn down to 16 Amp When needed NEMA 6-50p Portable EVSE Electric Vehicle Home Charging Station 20181011. Above video is of an older charging box that had a shake feature to change charging speeds, new charging boxes will have an on board button to push to change the charging speeds.

Works with all plug in hybrids and EV including but not limited to. BMW 330e, BMW 740e, BMW i8, BMW X5 xDrive40e, Chevy Volt, Chevy Bolt EV, Chrysler Pacifica Hybrid, Cadillac ELR, Honda Clarity, Mitsubishi Outlander PHEV, Fiat 500e, Ford Evos Hybrid, Ford Focus EV, Ford C-Max, Ford C-Max Energi, Karma Fisker, Kia Soul EV, Mercedes-Benz C350e, Mercedes-Benz GLE550e, Mercedes-Bens S550e, Mercedes-Benz B-Class Electric Drive, and B250e, Prosche Cayenne SE Hybrid, Porsche Panamera SE Hybrid, Tesla Roadster, Tesla Model X, Tesla Model S 70D, Tesla Model S P85D, Toyota Prius Prime, Mini Countryman, Nissan Leaf, BMW i3 REx, BMW E-Golf, Audi A3 Sportback, Audi A3 e-Tron, Hyundai Ioniq, Subaru Crosstrek PHEV, Volvo XC90. JUST PLUG-IN AND CHARGE: Level 2 portable EV charger. Requires a NEMA 6-50R receptacle socket. UNIVERSAL COMPATIBILITY: Charges every brand of EV on the market.

FAST AND EASY: Charges 600% faster than your 120 volt Level 1 cord that came with the car and 100% faster than standard 16 amp Level 2 240 volt charging! Features control box with LED charge status indicators. ADJUSTABLE and built in delay timer.

UL Listed J1772 SAE connector and cable. 12.8" X 8.9" X 1.5. Extra Long 7 Meter / 25 ft power cord.

Two ways to change charging speed: Key fob (two provided), or shake notification box. The EV Charge Solutions portable electric vehicle charger is a Level 2 station that delivers 32 amp (7.68kW) through 16 amps (3.84kW) ADJUSTABLE to your vehicle. This is a compact portable station that is an ideal solution for low-cost charging in your garage or to keep in the trunk of your EV for charging at work or on trips.

The charging station features a control box with LEDs indicating the status of the charge. There is a description for each light pattern in the product photos above. The charger comes with a draw string bag for storage and a soft gel cap that covers the connector and keeps it from getting wet or dirty.

The J1772 charger grip and power cord are water resistant for use in the rain. Please keep the charging box dry.

There are 24 inches/ 2 feet of power cord between the male prongs and the beginning of the charging box. The entire unit is made with 25 ft of cord.

Including male plug, cord, charging box, and the J1772, the entire system is right at 26 feet long. Why Adjustable and delay timer? - See Below at bottom of this web page. Below you will find the product specifications.

Charging plug meets SAE J1772 standards. Power plug meets NEMA 6-50 standards. Control box meets SAE J1772 control principle. Excellent protection performance, protection grade IP55. Rated current and voltage: 240V AC 32A.

Working temperature: -30 ° C + 50° C. Mechanical life: no-load plug in/pull out> 10000 times. Drop Load: 1 Meter / 3.3 ft Impact of external force.

Run Over Load: Tested that car can roll over charger nozzle 2 Times! Weight 8 lbs 16" X 12" X 6. Case Material: Thermo plastic, flame retardant grade UL94-0. Contact Pin: Copper alloy, silver + thermo plastic on the top. Sealing gasket: rubber or silicon rubber.

Over-voltage under-voltage protection (self-checking recover). Requires dedicated 240 Volt 40 or 50 Amp circuit / NEMA 6-50R Receptacle. Compare to current or past OEM associations.

GS New Energy B01ERWTI0E Micargo. 3030 PSE 16 100 01. Y-NOT Lectron 240v 16 amp B079NTXNK7 4897080225296 BougeRV IRV027.

B07BM1XT4Q 3030-PSE-16-7.6C-AS B07BGGVD9V Micargo B07BCDYWWZ Zencar B07B2RQ2WX Maxgreen MG-6-20-5A B07D5C316H. Image to right show if charger has open ground fault.

The red arrow on left show proper grounding. Red arrow on right show open ground that needs to be fixed. The more time you have to charge your car, it's best set to the lowest setting. Example, if I have the entire night and can leave the car on charge for 6 hours, set to 16 amps.

If traveling and using the optional Reverse6-50R box below, set to 16 amps. If stopping at home for lunch and only have an hour before I leave again, set to 32 amps.

If I only have about 4 hours to charge my car, set to 24 amps. The longer and slower you take to charge your batteries, the longer the batteries will last in both years as well as per charge. Changing all the car batteries is expensive and this charger will maximize their lifespan! Your batteries will last longer in both years before they will no longer hold a charge was well as each charge is more complete each individual charge last longer. Take with you on the go.

Set to 16 amp and use the optional converter box below. Optional: No Electrician Required to Move Up To Level 2 Charging Speeds! Power Joiner Step Up Inverter Level 2 Electric Car Charger Converts Dual 20amp 120volt outlets To 240volt 4wire 20amp 6-50R Level 2 [Reverse6-50R]. Adjustable to use with this power box. Charge at work, friends home, traveling, anywhere standard 120 volt wall outlets are available! Plugs into every building in USA, Canada, Mexico, and Japan and makes 240 on the go and Level 2 speeds! Sells and ships from San Antonio, Texas. As for the function of changing current/amps, it is only valid during the first minute once connected with power. The usage method of our EVSE is as below.

Plug in the male wall plug in the socket to connect power. If amperage change is needed, use swiping card to change amperage within the first minute or push the on board amp draw change button on charging box. The current has memory of its last use. Example, if it was set 24A last time, it would start at 24 amps this time. Then plug in the J1772 Plug in the car.

Please noted if connected with the car, the change amp draw function can no longer be used. The charger includes timer delay function.

After this, you'd better to swiping card to set timer function, Here I attached the user manual of how to use timer function as following: After on minute, the amperage speed is set. Then use the RFID card to set a optional delay timer before the charging starts. Note, in some locations electricity is cheaper later in the middle of the night.

He timer function has to be set after the J1772 Plug plugged in. Setting the delay timer can be used to reduce the charging cost! Related video below: 20181010 djc. Watch DIY Level 2 EV Car Charger Installation. 16 amp 240 volt Level 2 Fixed Charging Speed. Same 6-50P Plug Electric Vehicle Charger EVSE 220-240v Level 2 Car Nema 6-50P Plug To J1772 EV Charging Station Duosida 20180813. The item "Electric Vehicle Level 2 EV Charger 32 Amp 6-50 Plug ADJUSTABLE 25ft 240 Volt" is in sale since Monday, August 3, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Electric Vehicle Parts\Chargers & Service Equipment". The seller is "donaldcsatx40" and is located in San Antonio, Texas. This item can be shipped worldwide.

• Superseded Part Number: B07DHFH8LW
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Interchange Part Number: B01ERWTI0E
• California Prop 65 Warning: May or may not contain parts for the build that are on the CA Prop 65 warning list.
• Installation: Cordset
• Manufacturer Part Number: 20181011
• Level: 2
• Other Part Number: B075V4JNYS
• Brand: Zencar
• Non-Domestic Product: No
• Warranty: 2 Year