LuxHeat Cable Kit 120v (10-150sqft) Electric Radiant Floor Heating System Tile +

  

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT. LuxHeat's wide range of 120v and 240v loose-lay Cables & Strapping, offer the ultimate in design flexibility. Allowing for custom configurations and easy installations. Residential, Office apartments and Senior living facilities. Installs under tile, stone, marble, laminate and engineered wood floors.

UL listed for USA, classified as safe for wet Locations. Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire. Heater wire is less than 1/8 thick, ensures minimal effect on finished floor height. Ultra low EMF (Electromagnetic Field) Dual conductor Tech, Alu foil sheath and ground wire.

ETFE insulated and covered by tough outer jacket, providing protection against abrasion and corrosion. Dual sensing (Air & Floor). Large back-lit display with Intuitive menu. Other Modes: Child lock, Manual override & more. 7-Day Program, pre-set program can be customized to suit one's lifestyle.

Recommended by health professionals for allergy sufferers. Safe for children, elderly and pets - No hot, exposed or moving parts. Accurate and intelligent control ensures your personal comfort and affordability. Out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance and no smell.

Prolux Materials LLC is a family owned, American business, focused on delivering quality products throughout the USA. With production and distribution facilities in both Kentucky and Tennessee, we find ourselves well positioned to meet all logistical demands. Our Flagship Floor Heating brand, LuxHeat, coupled with OJ Microline&#####x2019;s range of intuitive, energy efficient thermostats, offers the ultimate in Luxury and Comfort, Reliability and Affordability. Suitable for Most Floor Coverings. Includes porcelain, ceramic, marble and more.

Safe for wet areas, including showers. Elements MUST be Embedded in Thinset, leveling or self-leveling compound. We recommend Installing a Floor sensor to limit floor temperature and protect flooring. Elements Must be Embedded in Thinset, leveling or self-leveling compound.

Includes Engineered and Solid wood. If it wasn&#####x2019;t for the cozy warm feeling in the room, you would never know it had been fitted.

Unlike conventional heaters that warm one particular spot, LuxHeat radiant floor heating evenly distributes warmth throughout the floor and up into the room, leaving no uncomfortable cold spots. The heat is directed where it is most pleasing &#####x2013; the feet &#####x2013; leaving the air we breathe slightly cooler.

In fact, the air surrounding our bodies remains slightly cooler than our bodies, preventing that &#####x2018;&#####x2019;stuffy&#####x2019;&#####x2019; feeling so often experienced in a room that is heated by forced air. Cables can be installed in any shape or pattern, to suit your floor layout. Uniform ohms resistance, ensuring even temperatures underfoot. Radiant heat does not dry out the air, circulate dust or aggravate allergies. No hot, exposed or moving parts, no maintenance and no fan noise.

Out of sight, no unattractive plug-in heaters or radiators. Optimal Comfort, Easy Control and Contemporary design. The modern thermostat provides so much more than simple temperature control - it is a personalized and intuitive device designed to give a greater degree of control and comfort in the hands of the user. The OJ Microline UDG-4999 Programmable Thermostat with built-in GFCI is an &#####x201C;all-in-one&#####x201D; intelligent programmable thermostat for radiant floor heating, providing optimal comfort temperatures and energy savings. Designed and manufactured by OJ Electronics &#####x2013; Denmark.

Monitored energy consumption &#####x2013; monitors cost while ensuring comfort. 7 Day, 4-Event program - Pre-programmed for quick set-up. Dual sensors (Air and Floor) with floor limiting feature. Built-in Class A GFCI (Ground Fault Circuit Interrupter).

Intuitive menus &#####x2013; no manuals needed. Large back - lit display for easy reading. Child lock - prevents tampering.

Plan cable layout and prepare floor. Fit strapping to sub-floor and run cable. Cover cables with Thinset or leveling compound. Complete floor installation and connect thermostat.

LuxHeat cables can be installed as a primary or secondary heat source, it doesn't have to be below Zero to enjoy a warm floor. Our wide range of loose-lay / free-form underfloor heating cables offer the ultimate in design flexibility, allowing for custom configurations and easy installations. Be sure to calculate the correct floor area as heating cables CANNOT.

Be embedded in a Self-leveling underlayment or Thinset. Insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength.

Dual wire technology with aluminium shield minimizes electromagnetic fields (EMF). Heater wire is less than 5/32 thick, ensuring minimal effect to finished floor height. LuxHeat cables provide optimal heat distribution at 12 watts/sqft (3&#####x201D; spacing). The UDG Thermostat can be configured for control of Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures. Thermostat box Includes 15ft Floor Sensor. The UDG offers all the necessary functions to ensure easy installation and temperature control, for every floor type. Accurate and intelligent control reduces running costs and ensures personal comfort. Ambient Temp Range +32 to +104&#######xB0;F (0 to +40&#######xB0;C). Floor limit range: +41 to +104&#######xB0;F (+5 to +40&#######xB0;C). Dimensions: H 4.8&#####x201D; x W 3&#####x201D; x D 1&#####x201D.

The LuxHeat Monitor is designed to measure the heating cable&#####x2019;s continuity during installation. If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light. We still recommend an ohms test is carried out before, during and after installation.

If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair. Early warning system, avoiding costly repairs in the future.

Connects directly to the heater - Live, Neutral and Earth. Includes loud alarm and flashing light.

Works with all floor heating systems. LuxHeat&#####x2019;s low profile, Strapping/Cable Guides, are specially designed to secure floor heating cables to the sub-floor, the Guides can be fixed to timber, concrete or tile backer boards.

If possible, we always recommend running cables down the length of the room, as this reduces installation time and minimizes strapping. For larger rooms, install additional strapping at 3-4 foot intervals, this will keep your wires from moving while applying Thinset or levelling compounds.

Easy to cut - 1 inch spacing offers unlimited design flexibility. Recommended spacing for optimal heat distribution is 3 inches. Guarantees consistent wire spacing for even heat distribution. Listing and template services provided by inkFrog.