Plasma Cutter 50 Amp Ready For 240 Volts But Dual Voltage

  
Comes with a 30 amp 3 prong 240 volts twist lock plug installed on end of power cord (voltage adapter not included). The EpicWeld GT5000D is a serious plasma metal cutting machine for the craftsman and professional both.

The EpicWeld GT5000D is a portable IGBT inverter HF start plasma cutter weighing just 19 pounds. The EpicWeld GT5000D Cutter is capable of cutting all conductive metals to a maximum clean cut in mild steel of 1/2 inch and is the ideal tool for those in the metal fabrication and construction industries where machine portability is crucial. The EpicWeld GT5000D has an adjustable cutting current between 20A and 50A which makes it a must have in the automotive industry.

Consumables are readily available and are a fraction of the cost of traditional product lines saving you many thousands of dollars in the long run. All IGBT power transistors are manufactured by either FUJI or TOSHIBA of Japan, chosen for their reliability and longevity in the toughest of environments.

What Is In The Box. Light weight plasma cutter only 19 pounds. Handy rigid carry handle for site work. Requires only 70 psi for cutting. Easy hand cutting of all conductive metals.

Start push button handle mounted switch. Amperage adjust dial on front panel. Auto input voltage & frequency sensing.

User-friendly amperage output control dial. 50A Plasma Cutter Torch [complete]. W/1 plasma electrode installed on torch.

W/1 plasma nozzle installed on torch. W/1 plasma ceramic shield cup installed on torch.

12.5 foot extra long torch cable. 6.5 foot ground cable & ground clamp. Air regulator built into front control panel. EpicWeld GT5000D - Plasma Cutter - Specifications. Length = 16 inches width = 6 inches height = 9 inches.

IGBT Inverter HF Plasma Cutter. 120/220 Volts 50/60 Hz +/- 15%, Single Phase. 3/8 inch Thick Steel 17 inches per minute. 3/4 inch Thick Steel 3 inches per minute.

6670 PSI at 4 CFM.